HYDLAR Z
HYDLAR® is a superior wear and abrasion resistant thermoplastic which uses aramid fiber reinforcement. This makes it an excellent alternative where high strength, extreme wear resistance and low abrasiveness are required. HYDLAR® is applicable to a wide variety of industrial applications such as wear strips, bearings, bushings, rollers and gears.
| Mechanical Properties | |
|---|---|
| Tensile Stength | 16,000 |
| Tensile Elongation | 4 |
| Tensile Modulus | 1,300,000 |
| Izod Impact Strength | 2.7 |
| Flexural Strength | 23,000 |
| Flexural Modulus | 900,000 |
| Compressive Strength | 19,300 |
| Compressive Modulus | |
| Dynamic Coefficient of Friction |
| Thermal Properties | |
|---|---|
| Heat Deflection Temperature at 66 PSI | |
| Heat Deflection Temperature at 264 PSI | 470 |
| Maximum Serving Temperature for Short Term | |
| Maximum Serving Temperature for Long Term | 300 |
| Thermal Conductivity | 0 |
| Coefficient of Linear Thermal Expansion | 1.60 x 10^5 |
| Flammability Rating |
| Electric/Physical Properties | |
|---|---|
| Volume Resistivity | 0 |
| Surface Resistivity | 0 |
| Dielectric Strength | |
| Specific Gravity | 1.16 |
| Toughness | 0 |
| Rockwell Hardness Shore D | |
| Water Absorption | 0.8 |
