Tecator™ Typical Property Values

 

Typical Property Values Properties ASTM Test Method Units Tecator™ TLN-5013 Tecator™ TLB-5031 Tecator™ GF30(XP142T) Physical Specific Gravity, 73°F D792 gm/cc 1.41 1.46 1.58 Water Absorption, 73°F - 24 hr. D570 % 0.3 – – Mechanical Tensile Strength, 73°F D638 psi 21,000 19,000 17,000 Tensile Elongation, 73°F D638 % at break 15 10 2 Flexural Strength, 73°F D790 psi 33,000 23,000 21,000 Flexural Modulus, 73°F D790 psi 711,000 870,000 821,000 Compressive Strength, 73°F D695 psi 30,000 – – Izod Impact Strength (Notched), 73 °F D256 ft-lb/in 2.3 2 0.75 Rockwell Hardness, 73°F D785 M scale M119 M109 M116 Thermal Heat Deflection Temperature, 264 psi D648 °F 532 534 – Coefficient of Linear Thermal Expansion E831 in/in°F 1.66x10-5 – 2.11x10-5 Continuous Service Temperature, Air – °F 500 500 500 Flammability (ASTM Method) UL94 – 94VO 94VO 94VO Electrical Dielectric Strength D149 V/mil 600 – 450 Dielectric Constant, 106 hz D150 – 3.9 – 3.8                              20 ghz D2520 – 3.2 3.8 4.3                              30 ghz D2520 – 3.7 3.9 4.4 Surface Resistivity D257 ohms 5.0 x1016 – – Dissipation Factor, 106 hz D150 – 0.009 – 0.006                            20 ghz D2520 – 0.009 0.012 0.005                            30 ghz D2520 – 0.005 0.018 0.008 Note: Tecator™ has a high moisture absorption rate. Parts must be dry prior to rapid exposure to temperatures above 300°F. NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets. All values at 73°F (23°C) unless otherwise noted. Tecator™ Overview Tecator™ is a trademark of Ensinger, Inc. This information is only to assist in and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All right reserved.