Home | Request Quote | Literature | About Us | Contact Us
 Search
800-776-7769
Material Properties more
 Material Properties
Click on the property name in the column header to sort the materials by that property.
Download PDF of this page  Print this page
Home » Tecapeek™ PVX
 

Tecapeek™ PVX

Request a Quote on Tecapeek
 
Buy Tecapeek RodBuy Tecapeek Sheet

Plastics International provides both standard and custom cut to size PEEK rod and sheets. Even if you need low minimums or odd sizes, we can meet your requirements. For fast turn-around and delivery of PEEK sheet and rod, you can count on Plastics International.

TECAPEEK™ PVX (PEEK) is an ultra high performance bearing material that incorporates the properties of a premium polymeric matrix material with optimum levels of specific wear enhancing additives. This formulation raises the continuous use temperature by approximately 40° F and increases the limiting pv while maintaining excellent chemical resistance.

peek rod and peek sheet parts

When used as a non-metallic bearing, Tecapeek™ PVX offers a superb range of tribological performance. It is designed to run at high loads and speeds, in hostile environments, either dry or lubricated.

Shop online for in-stock:

PEEK Sheet

PEEK Rod

  • High temperature performance.
    Continuous use temperature over 450° F.
  • Flammability is 94VO with a low limiting 02 index (= 40%) and very low smoke generation.
  • Can be used dry against hard or softmatting surfaces.
  • Excellent weather resistance.
  • Resistant to gamma radiation.
  • Complies with specific provisions of ASTM D6262-98.
  • Available in a wide range of extruded sizes of rod and plate for subsequent machined parts.


TYPICAL PROPERTY VALUES
Mechanical Properties ASTM Test Method
Tensile Strength (psi) D638 17,300
Tensile Elongation (%) D638 2.5
Flexural Strength (psi) D790 30,000
Flexural Modulus (psi) D790 1,200,000
Compressive Strength (psi) D695 22,000
Izod Impact Strength
(Notched)(ft-lb/in)
D695 1.6
Thermal Properties    
Coefficient of Linear Thermal Expansion (in/in/°F) D696 1.5 x 10-5
Melting Point (° F) DSC 633
Heat Deflection Temperature (° F) D648 530
Continuous Use Temperature (° F) UL746B 480
Specific Heat (BTU/lb°F) - .45
Physical Properties    
Specific Gravity(gm/cm3) D792 1.48
Color - Black
Maximum PV D1894-95  
Coefficient of Friction D1894-95 .19-.21
Wear Rate (in/min x 10-3) - 1.25-1.5

Call us at 800-776-7769 for more information or to order custom PEEK rod or sheet.

Log In more
E-Mail Address:
Password:
Shopping Cart more
0 items
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
Prices listed on this website are valid for internet orders only.
  Need to be set up with credit? Click here for application.
7600 Anagram Drive Eden Prairie, MN 55344 | Phone: 952-934-2303 | Toll Free: 800-776-7769 | Fax: 952-934-2314 | Site Map
Servicio en Español: 612-567-2303 | espanol@plasticsintl.com
Plastics International
Site Map | Site Credits: Ecreativeworks