- Plastic Sheet
- Plastic Rod
- Plastic Tube
- By Material
- ABS (Tecatran®)
- Acetal (Tecaform®, Delrin®)
- Acetal Copolymer (Tecaform™)
- Acetal Homopolymer (Delrin®)
- Acrylic (PMMA, Optix®, Plexiglass, Lucite)
- Acrylic/PVC Alloy (Kydex®, Boltaron®)
- Ceramic (Macor®)
- CPVC (Chlorinated polyvinyl chloride, Corzan®)
- Cross-linked Polystyrene (REXOLITE®)
- ECTFE (Ethylene chlorotrifluoroethylene, Halar®)
- Enhanced PTFE (Rulon®, Fluorosint 207® and 500®)
- ETFE (Ethylene tetrafluoroethylene, Tefzel®)
- FEP (Fluorinatedethylenepropylene)
- Fiberglass NEMA Sheet (GP01, GP02, GP03)
- Glass Epoxy Laminate G-10/FR-4
- Glass Epoxy Laminate G-11/FR-5
- Glass Melamine Laminate G-9
- Glass Silicone Laminate G-7
- HDPE (High Density Polyethylene, Tecafine®)
- LDPE (Low Density Polyethylene)
- Modified PTFE (Teflon® NXT 70, Daikin M111)
- Noryl® PPO (Tecanyl®)
- Nylon (Tecamid®, Tecast®, Nycast®/Nyoil® FG, Nylatron®)
- Nylon 6 Cast (TECAST VEKTON™)
- Nylon 6/6 Extruded
- PBI (Polybenzlmidazole, Celazole®)
- PBT (Polybutylene terephthalate, Hydex® 4101/41010L)
- PCTFE (Polychlorotrifluoroethylene)
- PEEK (Polyetheretherketone, Tecapeek®)
- PET-P (Tecapet®, Ertalyte®)
- PETG (Polyethylene Terephtalate Glycol-modified, Vivak®)
- PFA (Perfluoroalkoxy)
- Phenolic (Linen, Canvas, Paper)
- Polyamide-imide (Tecator®, Torlon®)
- Polycarbonate (Makralon®, Tecanat®, Lexan®)
- Polyetherimide (Ultem® PEI, Tecapei®, Semitron®)
- Polyimide (Vespel®, Meldin®)
- Polyimide film (KAPTON®)
- Polymethylpentene (TPX®)
- Polypropylene (Tecafin®, Proteus®)
- Polystyrene High Impact
- Polysulfone (Tecason® S)
- Polyurethane (Instantroll®)
- PPS (Polyphenylene Sulfide, Tecatron®, Techtron®, Ryton®)
- PPSU (Polyphenylsulfone, Radel® R5500)
- PTFE (Polytetrafluoroethylene)
- PVC (Polyvinyl chloride, Type I or Type II)
- PVDF (Polyvinylidene fluoride, Tecaflon ®, Solef®, Kynar®)
- UHMW-PE (Ultra-high molecular weight polyethylene, Tivar®)
- Vulcanized Fiber/Fish Paper
- Wave Solder Pallet Material (Durostone®, Delmat®)
- By Industry
Home » Hardness Scale - Durometer Comparisons of Materials
Hardness Scale - Durometer Comparisons of Materials
 |
7600 Anagram Drive
| Eden Prairie, MN 55344 | Phone: 952-934-2303 | Toll Free: 800-776-7769 | Fax: 952-934-2314 | Site Map
Servicio en Español: 612-567-2303 | espanol@plasticsintl.com