Geometric Stability at High Temperature MELDIN® 7000 series of materials exhibit extremely high geometric stability at elevated temperatures. Testing has shown MELDIN® 7000 to have less than 0.04% variation from its original dimensions after cycling from 73°F (22.77°C) to 500°F (260°C) over a 2 day period.
Total Process Control... Powder-to-Parts Our expanding resin production facility and our R&D testing labs allow Saint Gobain Performance Plastics to maintain control of the quality and source of the base polyimide resin. Our "Powder-to- Parts" capability means total process control of resin production, stock shape manufacturing, direct forming, and critical dimensional machining of your finished parts.
Longer Life at Higher Loads and Speeds The self-lubricating grades of MELDIN® 7000 do not melt when exposed to high load (P), or high speed (V) applications, as compared to more traditional PTFE or thermoplastic polymers. P x V limits for MELDIN® 7000 self-lubricating grades exceed 300,000 in dry environments and past 1,000,000 in liquid or grease lubricated environments.
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
Prices listed on this website are valid for internet orders only.
